Service Robot Motherboard, WF-RK3568, AndroidSBC, Chennai

TL;DR: Service Robot Motherboard

LONGGANG, Shenzhen, September 10, 2026 - A 26,605-unit WF-RK3568 order for Chennai, India completed burn-in and documentation at the Wanlin Longgang plant this week, the 251st lot released on the Rockchip RK3568 line.

AndroidSBC shipping and Incoterm briefing for WF-Series board orders serving Chennai, India. The WF-Series spans nine boards in one line: WF-A133 on the Allwinner A133 quad-core Cortex-A53 1.5GHz platform with the PowerVR GE8300 GPU, WF-H618 on the Allwinner H618 with 8K H.265 decode, WF-T527 on the Allwinner T527 octa-core Cortex-A55 with a 2 TOPS NPU, and the Rockchip side of the line covering WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, and WF-RK3588S. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the whole line from the Longgang source factory in Shenzhen to Chennai and India importers running OTT TV box, Android TV, commercial display, industrial control, edge AI, POS terminal, kiosk, and IoT gateway programmes.

About AndroidSBC and the Rockchip RK3568 Board Family

Wanlin Manufacturing Group has been building Android and Linux boards in Shenzhen since 2013, and AndroidSBC is the group's export-facing brand. The WF-Series is the current custom board line: Allwinner A133, H618, and T527 on one side, Rockchip RK3588, RK3568, RK3566, and RK3288 on the other, with WF-A133S and WF-RK3588S covering buyers who want an SOM plus their own carrier. Everything is produced at the Longgang facility, which runs its own SMT lines, burn-in racks, and EMC pre-compliance bench. Chennai and India buyers typically come to the WF-Series for one of three reasons: a multi-platform catalogue, a source factory that will take OEM branding work, or a supplier who will carry the certification paperwork instead of leaving it to the importer.

WF-RK3568 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3568 (Industrial Edge Computing Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For India importers sourcing the WF-Series, the 4GB + 32GB (WF-RK3568-A) variant is the typical configuration for the industrial edge computing use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Industrial Edge Computing Board for India Buyers

The recurring problem for Chennai and India buyers sourcing a industrial edge computing board is not the headline unit price, it is whether the allocation actually holds. The Rockchip RK3568 needs its own wafer slot, and brokers who quote from stock frequently cannot honour that slot once a 26,605-unit push lands mid-quarter. The software question follows immediately. The hardware spec sheet is easy to verify; the difference between a board that runs a launcher and a board that holds a certified, credential-locked stack only becomes visible after the first field update.

Documentation closes the list. Buyers in Chennai have learned to ask for the test reports before the deposit, because a CE mark printed on a carton is worth nothing at the port without the Declaration of Conformity behind it. AndroidSBC moves both risks inside the factory: the certified image is burned at Longgang, the burn-in record is attached per unit barcode, and the Technical File ships with the lot. Across the nine WF-Series boards the coverage runs from industrial edge computing, commercial display controller, industrial HMI, IoT gateway, smart display terminal, machine monitoring, access control, and building automation, with three memory configurations per model, so a Chennai buyer can usually match a requirement from standard stock.

Buyers in India tend to ask about the local mark before they ask about price. In India BIS CRS registration and WPC ETA are both mandatory for wireless product, and the registration is held by an Indian entity, which shapes how the first order is structured. AndroidSBC handles that by preparing the destination-market file covering BIS CRS registration with WPC ETA for wireless modules administered by BIS / WPC alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the lot routed through Nhava Sheva, JNPT on the Nhava Sheva to Shekou lane.

Competitive Comparison: WF-RK3568 vs Competing RK3568 Boards

Competing boards in the industrial edge computing board category sort into three camps: cheap legacy SoC boards, mid-range Cortex-A55 boards with certification, and 64-bit boards with real expansion. The WF-RK3568 is in the last camp, and its edge is Rockchip RK3568 plus a display path that holds under a continuous loop rather than a bench test.

• vs RK3288 Cortex-A17 boards: the RK3568 Cortex-A55 2.0GHz lifts integer throughput by roughly 2x at lower idle power.
• vs RK3566 boards: the RK3568 adds dual Gigabit Ethernet plus CAN bus for gateway-class builds.
• vs RK3588 boards: the RK3568 keeps a materially lower BOM where 4K@60fps decode is sufficient.
• vs x86 fan-cooled IPC: the RK3568 fanless design removes the only moving part from the enclosure.

Global Industrial Edge Computing and Smart Display Market Trends

The Industrial Edge Computing and Smart Display curve is what India importers read before committing to a industrial edge computing board programme. The number they quote is the Android TV Box segment at USD 12.45 billion in 2025 with a 30.49 percent CAGR to USD 178.2 billion by 2035 (Global Growth Insights, Android TV Box Market Report, 2025-2035), which serves as the closest public proxy for Android silicon demand. For Chennai that resolves into three demand patterns across the WF-Series order book:

• Industrial edge computing: WF-RK3568 runs the edge workload on the 1 TOPS NPU with dual Gigabit uplinks.
• Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3568 board carries that headroom without a board change.
• Industrial HMI: WF-RK3568 holds the wide-temperature envelope with the fanless design.

For the Industrial Edge Computing and Smart Display category the practical signal in India is that framework agreements are replacing spot buying, and the agreements are getting longer.

Across those three segments, Chennai procurement has been shifting from spot quotes to framework agreements with a one-lot-per-month cadence, particularly where a retail or hospitality programme needs a twelve-month shipping window.

Partner Success Story: Orion Transit Systems in Chennai, India

Orion Transit Systems, a rail information systems contractor serving the India market, deployed 5,700 units of the WF-RK3568 board for platform information displays. The rollout covered the industrial edge computing, industrial hmi, and machine monitoring workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

• Deployed: 5,700 units of the WF-RK3568 board for platform information displays
• Region: Chennai, India
• Models used: WF-A133, WF-H618, WF-T527, WF-RK3588, WF-RK3568, WF-RK3566, WF-RK3288, WF-A133S, WF-RK3588S
• Certifications handled: CE, FCC, UKCA, RoHS, REACH, GMS, Widevine L1, Dolby Audio
• Logistics: FOB Shekou with the Wanlin Group Longgang source factory named on the export declaration, entering Nhava Sheva, JNPT via the Nhava Sheva to Shekou lane

"Platform displays run 7x24 with no one watching. The watchdog and the scheduled restart on the RK3568 board mean our maintenance visits are scheduled, not reactive."

- James Whitfield, Programme Manager

Field Report: an engineering review at the Wanlin Longgang plant, where the Chennai buyer team walked the WF-RK3568 carrier design through schematic and stack-up sign-off

Reporter Mao Yi, on the ground in Chennai, India. The buyer's hardware lead spent three days at Longgang reviewing the schematic, the stack-up, and the signal integrity report with the Wanlin engineering desk. Two net-class changes came out of the review and were folded into the next carrier revision before the tooling release.

A carton-level audit matched 40 sampled serials against the burn-in database with no mismatch.

The inspection confirmed three things on the spot: the WF-RK3568 units hold the burn-in with a yield above 99.35 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering BIS CRS registration with WPC ETA for wireless modules administered by BIS / WPC, cleared for entry at Nhava Sheva, JNPT on the Nhava Sheva to Shekou lane. Wanlin remains one of the few source factories currently shipping a nine-board Allwinner and Rockchip custom line with a per-lot paper trail that India importers can hand straight to their customs broker.

Filed by Mao Yi, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-RK3568 Application Scenarios

The WF-Series fits nine application lanes, with the WF-RK3568 (Industrial Edge Computing Board) as the lead SKU for Chennai and India programmes:

• Industrial edge computing: WF-RK3568 runs the edge workload on the 1 TOPS NPU with dual Gigabit uplinks.
• Commercial display controller: WF-RK3568 drives the 4K@60fps panel pair over HDMI 2.0 and eDP.
• Industrial HMI: WF-RK3568 holds the wide-temperature envelope with the fanless design.
• IoT gateway: WF-RK3568 bridges CAN bus and RS485 field devices onto Ethernet.
• Smart display terminal: WF-RK3568 renders the Android 11 UI on the dual display path.
• Machine monitoring: WF-RK3568 timestamps production data against the onboard RTC.
• Access control: WF-RK3568 runs face recognition on the NPU with the MIPI CSI feed.
• Building automation: WF-RK3568 runs 7x24 with hardware watchdog and scheduled restart.

Partnership Models for Chennai Buyers

For Chennai distributors and brand owners, AndroidSBC opens the industrial edge computing board line under three contract shapes:

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
• ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
• Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Whichever structure a India partner selects, the lot leaves Longgang with the same certification pack and the same test flow. The standard entry point on the WF-RK3568 is the 4GB + 32GB (WF-RK3568-A) configuration at MOQ 5,000 units per shipment, four weeks to sample and six weeks to production.

Frequently Asked Questions

Does the WF-Series support certified Android TV or Google Mobile Services?

Answer: On the WF-H618, yes: ATV 12 with GMS plus Widevine L1 and Dolby Audio, burned on the Longgang line for every lot. On the remaining eight boards the default image is AOSP or a Linux distribution, because those boards usually sit in commercial display, industrial, or POS deployments where Play Services is not a requirement. AndroidSBC will build a GMS image for ODM customers who ask for it and will state clearly which boards carry which certification.

What is the difference between the nine WF-Series models?

Answer: The line splits by workload. Three Allwinner boards cover cost-sensitive display work (WF-A133), OTT and Android TV (WF-H618), and industrial control with NPU inference (WF-T527). Four Rockchip boards cover 8K video wall and AI computing (WF-RK3588), industrial edge (WF-RK3568), machine vision (WF-RK3566), and POS or signage (WF-RK3288). Two further models are modules rather than motherboards: WF-A133S and WF-RK3588S are SOM parts for customers who bring their own carrier design.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, and REACH paperwork for India?

Answer: Yes. AndroidSBC ships a Declaration of Conformity plus a Technical File with every lot. The file contains the CE test reports, the FCC Part 15 report, the UKCA dossier where relevant, the RoHS 2.0 report, and the REACH declaration, all dated within the prior twelve months. Where a India market needs an additional national mark, the export desk will confirm coverage before the order is confirmed rather than after.

What are the MOQ and lead time for a first order?

Answer: 5,000 units per shipment on standard configurations, four weeks to sample and six weeks to mass produce. Where a India partner signs a twelve-month blanket order, the MOQ per release becomes negotiable and the line will accept platform-mixed purchase orders.

Does AndroidSBC support custom Android ROM or custom Linux development?

Answer: Yes. Under NDA, AndroidSBC delivers custom Android ROM work with proprietary services, custom Linux images on Yocto or Debian or Buildroot, and BSP ports for customer carriers. The engineering desk at Longgang performs the port itself, which matters because an unmodified vendor BSP rarely matches a customer carrier revision.

What about software updates and long-term support?

Answer: The commitment is seven years minimum on supply, with security patches back-ported across the Android and Linux tracks. AndroidSBC also runs an OTA service that partners can use to push firmware to deployed units. On POS and industrial programmes, that commitment is written into the contract, because a fleet in the field is only as good as the update path behind it.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes. AndroidSBC ships DDP to Amazon FBA warehouses in the US, EU, and Japan, and to nominated 3PL consolidation points in Hong Kong, Singapore, Rotterdam, and Los Angeles. Carton labelling and pallet configuration are set up for FBA inbound requirements, and the export declaration names the Wanlin Longgang source factory as the place of origin.

How does AndroidSBC handle RMA or DOA replacements?

Answer: Target DOA is 0.3 percent across twelve months. RMA works by returning the WF-RK3568 unit to Longgang with its burn-in barcode; replacements ship inside ten business days. Since each unit is traceable to its burn-in record, partners typically receive a root-cause note with the replacement rather than a silent credit.

Contact AndroidSBC: Start Your WF-RK3568 Sourcing Conversation

AndroidSBC is the export channel for the Wanlin WF-Series. Buyers in Chennai and India looking to source the WF-RK3568 straight from the source factory can use any of the following:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Destination market file: BIS CRS registration with WPC ETA for wireless modules for India, administered by BIS / WPC, entering at Nhava Sheva, JNPT on the Nhava Sheva to Shekou lane
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

The export desk asks for three things on a first enquiry: annual volume, certification scope, and Incoterm. Provide those and a per-lot quote plus the WF-Series MOQ matrix comes back within two business days.